Saturday, January 21, 2017

Stanchions and Plastic Chain

So last year at our Pinewood Derby, and then at our Blue and Gold, and then at the Mall Show, I kept wanting to come up with some better means of crowd control than cones and rope because while they did work to an extent, they were very easy to knock over or push out of the way.  Plus they weren't Cub Scout themed.  This is what I came up with, and will be building more of.

The finished product.


 I had decided on 6mm yellow plastic chain, as it's highly visible and relatively light. The next step was to design the stanchions.  Originally I wanted to utilize PVC pipe with a threaded flange so that they could be broken down for storage but that was going to get expensive.  We could have bought the ready made plastic stanchions for the same price it would cost to construct them.


Then I stumbled upon these 2x3 balusters at Home Depot and they were just the right size.  I still wanted them to be able to be broken down and considered utilizing hanger bolts and wing nuts to attach them to the MDF bases I had made, however I was running out of time and using what I had on hand won out over tracking down the right hardware.  I ended up using 5/16" x 4" lag bolts.


The edges of the MDF bases were rounded over with a router, as was the top of the baluster.  Once everything was assembled it was all sprayed blue.  The last step was to attach the chain to the stanchions and for that I ended up going with 1 1/4" white safety cup hooks.  These are the perfect size to hold the chain and offer a certain amount of deterrent from just unhooking it to walk through.

No comments:

Post a Comment